FujiFilm CR-IR 355RU, Руководство по эксплуатации

Страница: 17 / 126

1-7
For Safe Operation
1
FCR XC-1 Operation Manual
First Edtion 11.2005 897N0565
Guidance and manufacturer’s declaration - electromagnetic emissions
The CR-IR 355RU is intended for use in the electromagnetic environment specified below.
The customer or the user of the CR-IR 355RU should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The CR-IR 355RU uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to cause any interference
in nearby electronic equipment.
RF emissions
CISPR 11
Class A
The CR-IR 355RU is suitable for use in all establishments other than domestic and
those directly connected to the public low-voltage power supply network that
supplies buildings used for domestic purposes. Harmonic emissions
IEC61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC61000-3-3
Complies
Guidance and manufacturer’s declaration - electromagnetic immunity
The CR-IR 355RU is intended for use in the electromagnetic environment specified below.
The customer or the user of the CR-IR 355RU should assure that it is used in such an environment.
Immunity test IEC 60601 test level Compliance level
Electromagnetic environment -
guidance
Electrostatic discharge
(ESD)
IEC61000-4-2 ±6kV contact
±8kV air ±2kV contact
±4kV contact
±6kV contact
±2kV air
±4kV air
±8kV air Floors should be wood, concrete or
ceramic tile. If floors are covered with
synthetic material, the relative
humidity should be at least 30%.
Electrical fast transient/
burst
IEC61000-4-4 ±2kV for power supply
lines
±1kV for input/output lines ±2kV for power supply
lines
±1kV for input/output lines Mains power quality should be that of
a typical commercial or hospital
environment.
Surge
IEC61000-4-5 ±1kV differential mode
±2kV common mode ±1kV differential mode
±2kV common mode Mains power quality should be that of
a typical commercial or hospital
environment.
Voltage dips, short
interruptions and
voltage variations of
power supply input
lines
IEC61000-4-11 <5% U
T
(>95% dip in U
T
)
for 0.5 cycle
40%
U
T
(60% dip in U
T
)
for 5 cycles
70%
U
T
(30% dip in U
T
)
for 25 cycles
<5%
U
T
(>95% dip in U
T
)
for 5 s
<5% U
T
(>95% dip in U
T
)
for 0.5 cycle
40%
U
T
(60% dip in U
T
)
for 5 cycles
70%
U
T
(30% dip in U
T
)
for 25 cycles
<5%
U
T
(>95% dip in U
T
)
for 5 s
Mains power quality should be that of
a typical commercial or hospital
environment. If the user of the
CR-IR 355RU requires continued
operation during power mains
interruptions, it is recommended that
the CR-IR 355RU be powered from
an uninterruptible power supply or a
battery.
Power frequency
(50/60Hz) magnetic
field
IEC61000-4-8 3 A/m 3 A/m Power frequency magnetic fields
should be at levels characteristic of a
typical location in a typical commercial
or hospital environment.
NOTE: U
T
is the a.c. mains voltage prior to application of the test level.