FujiFilm CR-IR 355RU, Руководство по эксплуатации

Страница: 49 / 126

5-9
Troubleshooting
5
FCR XC-1 Operation Manual
First Edtion 11.2005 897N0565
5.5 When Image Is Streaked
This section provides an example of a streaked image scanned with the FCR XC-1 and an explanation
of how to fix the streaking problem.
If there is soil on the scanner, an IP or both of them, a scanned image may be streaked as shown below.
Streak
Note that the streak on this example is enhanced
for the sake of clarity.
■
Remedial method
• Scanner cleaning
Perform the cleaning of the scanner using the Utility.
For how to clean the scanner, see the applicable section in Chapter 4.
•
Clean the IP.
Wipe the surface of the IP with a soft, dry cloth.
If the soil fails to come off by dry wiping, wipe the surface using a small amount of dehydrated
ethanol.
Completely dry the IP surface before use.
•
Exercise due caution not to damage IPs.
• Never use plastic erasers and other solvents.
•
Do not dig your finger nails into IP surfaces.
• Pay due attention not to use a large amount of
dehydrated ethanol or clean the IP too
frequently, otherwise the IP edges may turn
yellowish.
For IP cleaning, refer to “ B.2 Handling, Daily Care, and Storage of IPs .”