FujiFilm CR-IR 355RU, Руководство по эксплуатации

Страница: 21 / 126

1-11
For Safe Operation
1
FCR XC-1 Operation Manual
First Edtion 11.2005 897N0565
16. Clean the air outlet openings periodically to keep them clear of dust or the like which can cause
blocking. If they are blocked, the temperature inside the FCR XC-1 (CR-IR 355RU) rises abnormally
high and the image on the IP may be imperfectly erased, possibly causing an output image that
does not allow accurate image interpretation.
17. An inserted cassette should not be taken out until the cassette ejection lamp blinks (blue) and the
message “Take out the cassette” is displayed.
If you try to pull out such an in-process cassette, it becomes the unremovable.
18.
Do not insert an unspecified cassette into the Image Reader. If an unspecified cassette is inserted
into the Image Reader, image reading is disabled. Be sure to use a specified cassette.
19. Do not place an unspecified IP into the cassette, otherwise an image that may affect image reading
can be output.
20. Replace the erasure lamp when the message prompting for replacement is displayed.
For the replacement of the lamp, please contact your local authorized distributor. When the lamp
fails, image erasure becomes impossible.
21. If IP erasure processing results incomplete because an IP type older than ST-VN was used, contact
your local authorized distributor.