Float Switch Information
The SJE Rhombus SignalMaster float switch is pre-mounted in FujiClean USA treatment systems. This
information from SJE Rhombus is supplied for informed, proper handling during the installation process.
46
ELECTRICAL SHOCK HAZARD
Disconnect power before installing or servicing this
product. A qualified service person must install and
service this product according to applicable electrical
and plumbing codes.
EXPLOSION OR FIRE HAZARD
Do not use this product with flammable liquids. Do not
install in hazardous locations as defined by National
Electric Code, ANSI/NFPA 70.
Failure to follow these precautions could result in serious injury or death. Replace product immediately if switch becomes damaged or severed. Keep
these instructions with warranty after installation. This product must be installed in accordance with National Electric Code, ANSI/NFPA 70 so as to
prevent moisture from entering or accumulating with in boxes, conduit bodies, fittings, float housing, or cable.
PREVENTATIVE MAINTENANCE
•
Periodically check the product. Check that the cable has not become worn or that the housing has not been damaged so as to impair the protection
of the product. Replace the product immediately if any damage is found or suspected.
•
Periodically check to see that the float is free to move and operate the switch.
•
Use only SJE Rhombus replacement parts.
•
The Sensor Float and Sensor Float Mini control switches contain mercury and MUST be recycle or disposed of according to local, state and federal
codes.
3.5 inch
(9cm)
tether length
approximate activation
level of 1.5 inches
(4cm) above or
below horizontal
Содержание CE
Страница 37: ...37 Step 14 continued Rebar arrangement details ...
Страница 42: ...42 M Control Panel Wiring Diagram p 2 ...
Страница 45: ... A Control Panel Wiring Diagram p 2 45 ...