Fuji Xerox DocuCentre-II 6000, Руководство пользователя

Страница: 55 / 206

Copying Procedure
53
Co
py
3
1
Remove any paper clips and
staples before loading the
document.
2
Adjust the movable document
guides to match the size of the
document loaded.
Note • When loading a large
document such as A3, open
the document stopper
rightward.
3
Place the document (the front side
of 2-sided document up) face up in
the center of the document feeder.
Note • The indicator lights up when
the document is loaded
correctly.
Document Glass
The document glass supports a single sheet, a book, or other similar documents up to
297 x 432 mm (A3, 11 x 17 inches).
Important • After using the document glass, close the document cover.
The document feeder automatically detects standard size documents. For non-
standard size documents, input the size in the [Original Size] screen.
For information on entering document sizes, refer to "Original Size (Specifying the Scan Size for the
Document)" (P.71).
Note • The standard document sizes that can be detected automatically depend on the [Paper Size
Settings] in the System Administration mode. For information on the paper size settings,
refer to "6 System Settings" > "Common Settings" > "Other Settings" > "Paper Size Settings"
in the Administrator Guide.
1
Open the document cover.
Important • Ensure that a screen is
displayed on the control
panel, and then load a
document. If a document is
loaded before a screen is
displayed, the machine may
not properly detect the
document size.
WARNING
Do not apply excessive force to hold thick document on the platen glass. It may break
the glass and cause injuries.