Fuji Xerox DocuCentre-II 6000, Руководство пользователя

Страница: 194 / 206

8 Server Fax
192
Se
rv
e
r Fa
x
8
Transmission Options
You can specify fax transmission conditions in the [Transmission Options] screen. The
following shows the reference section for each feature.
Delayed Start (Specifying Send Time) .....................................................................................192
1
Select [Fax Service] on the [All
Services] screen.
2
Select the [Transmission Options]
tab and then select a feature on the
[Transmission Options] screen that
appears.
Delayed Start (Specifying Send Time)
You can specify a send time for a fax using the Delayed Start feature. It is useful for
sending fax when communication charges are low, such as midnight.
Important • If a power failure occurs or the power is turned off when the Delayed Start feature is set, the
setting is cleared and transmission begins as soon as the power is turned on.
Note • You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• You can set [Delayed Start] separately for each address number. For information on how to
register address numbers, refer to "6 System Settings" > "Setup Menu" > "Address Book" in
the Administrator Guide.
• If address number or group dial numbers are dialed with the Broadcast Send feature, the
Delayed Start setting specified for each address number is invalid.
• If the fax cannot be sent at the specified time because, for example, the telephone line is
busy, it will be sent as soon as the line becomes available.
1
Select [Delayed Start] on the
[Transmission Options] screen.
2
Select [On] of [Delayed Start] to set
Delayed Start.
3
Select [AM] or [PM].
4
Enter [Hours] and [Minutes].
Important • If you press the <Start> button
after the specified time
elapses, the stored document
will be sent at the specified
time the next day.
„
Off
Delayed Start is not applied.
„
On
Delayed Start is applied.