Fuji Xerox DocuCentre-II 6000, Руководство пользователя

Страница: 102 / 206

3 Copy
100
Co
py
3
„
Annotation
For information on the feature, refer to "Annotation (Adding Stamp/Date/Page Number to Copies)"
(P.88).
„
Watermark
For information about the feature, refer to "Watermark (Printing Control Number on the Background)"
(P.92).
„
Secure Watermark
For information about the feature, refer to "Preset Repeat Image (Making Multiple Copies on a Single
Sheet)" (P.97).
„
Output Orientation
For information about the feature, refer to "Output Orientation (Specifying Face Up or Down)" (P.97).
[Copy Job] screen
The following describes the screen that appears while the Build Job is being executed.
„
Chapter Start...
Displays the [Build Job - Chapter Start/Separators] screen.
Refer to "[Build Job - Chapter Start/Separators] Screen" (P.100).
„
Change Settings...
The Copy screen appears and you can change the settings for the loaded document.
After setting the features, press the <Start> button on the control panel to start
scanning of the document.
„
Last Original
Select this to end scanning of documents. The build job starts.
„
Next Original
Select this when you have another document. This item is selected when using the
Build Job feature.
„
Cancel
The document data stored by the Build Job feature is cleared and the job is cancelled.
Note • The same operation is performed if you press the <C (Clear)> button or <Clear All> button
on the control panel.
„
Start
When loading the next document and select [Start], the next documents are scanned.
Note • The same operation is performed if you press the <Start> button on the control panel.
[Build Job - Chapter Start/Separators] Screen
You can set the chapter start and separators.