Fuji Electric FCX-AII-V5 series, Инструкция по эксплуатации и сервисное обслуживание

Страница: 58 / 120

56 TN5FCXA2V5h-E
"LINKING
"LINKING
,IGHTING
SPAN
%
SPAN
%
SPAN
%
M
⑥ ⑦
⑧
⑩
M
M
M
⑨
M
,IGHTING
,IGHTING
,IGHTING
OR
#ANCEL
THESETTING
3AVE
THESETTING
A-2 Span (URV) calibration
• Press the key on the screen h to select the span
calibration mode.
The measured value and unit on the screen ( i ) are
WKHVDPHDVWKRVHLQWKHQRUPDOPRGHDQG³ĸ´DQG
“SPAN” light up.
• Apply the actual input pressure on the screen i . Af-
ter checking the measured value, press the key.
• “SPAN” blinks on the screen j . Press the key on
the screen j to perform a span calibration at the in-
put pressure at the time.
To perform a span calibration at a point other than
100%, input an appropriate set value (%) ( k ) with
the and keys, and press the key.
3/ 8SSHUOLPLWRIDGMXVWPHQWSRLQWî
Setting range
• Select whether the span calibration value setting is
saved on the screen l .
Press the key to save the span calibration value
setting and return to the screen i .
Press the or key to cancel the setting and return
to the screen i .
• Check that the span calibration was performed as in-
tended.
Press the key to perform a span calibration again.
Press the or key to move to the next screen for
item name selection.