Fuji Electric FCX-AII-V5 series, Инструкция по эксплуатации и сервисное обслуживание

Страница: 31 / 120

TN5FCXA2V5h-E 29
The oil density of the diaphragme seal can be done by Fuji Electric.
For information, the current values are as follows :
0
20
40 60
80 10
0
l
1
0
H
H
0
H
0
20 40 60 80
10 0
0
H
T
0 20
40 60 80
10 0
0
H
T
l
0
Caution when vacuum measurement
When process pressure is nearly vacuum pressure, the transmitter must be
LQVWDOOHGEHORZWKHSUHVVXUHFRQQHFWLRQVHH¿J
,ILQVWDOODWLRQLVOLNH¿JRUDQDGGLWLRQQDOQHJDWLYHSUHVVXUHLVGRQHE\
H
0
RI¿OOLQJOLTXLGLQWKHFDSLOODULHVEHWZHHQWUDQVPLWWHUDQGWKHORZSUHVVXUH
connection.
In this case, it is imperative to check that the resulting pressure of measure-
ment cell of transmitter is greater than minimum pressure service (refer the
WHFKQLFDOVSHFL¿FDWLRQVRIWKHWUDQVPLWWHUPRGHOXVHG
When in doubt, please consult Fuji Electric France .
Caution on installation
• In order to prevent vibration of the transmitter body and capillary from interfering with
output, the transmitter body should be installed at a vibration free place and the capillary
VKRXOGEH¿[HGWRDVWDEOHVXSSRUW
• Avoid to locate capillaries (high and low pressure) in a place where ambiant temperature
DQGVXQOLJKWDUHYHU\GLIIHUHQW,WFDQEHLQÀXHQFHWKHPHDVXUHPHQW,ILWLVQRWSRVVLEOH
please put a warm up system to maintain a constant temperature.
• Do not scratch or shock the seal diaphragm by hitting hard object against it, for example.
,WZRXOGGDPDJHGH¿QLWHO\WKHWUDQVPLWWHU
‡ 'RQRWDSSO\DQH[FHVVLYHIRUFHWRWKHVFUHZRIÀDQJHGXULQJFRQQHFWLRQUHVSHFWWKH
tightening torque according to pipie standard).
Freeze protection.
,IWKHÀXLGHFDQIUHH]HWKHWUDQVPLWWHUDQGWKHLPSXOVHSLSHPXVWEHZDUPHGXSZLWKVWHDPRUD
heater.
Do not exceed the temperature limits (measuring cell: 120°C maxi and transmitter: 85°C).
Even when the installations shut down the heat must be maintained, if not the transmitter and
impulse pipes must be drained to prevent freezing.
1 2 3
PROHIBTION
Filling oil Density Applications
Silicone 0,934 générales
Haigh temperature, high temperature and
1,07 et vaccum service, high temperature and
absolute vaccum service
Fluorinated 1,84 Oxygen measurement