Fuji Electric 6MBP15XSD060-50, Руководство по применению

Страница: 10 / 57

Fuji Electric Co., Ltd.
MT6M12343 Rev.1.0
Dec.-2016
1-8
Chapter 1 Product Outline
Item Symbol Rating Unit Descriptions
High-side Supply Voltage V
CCH
-0.5 ~ 20 V
Voltage that can be applied between COM
and V
CCH
terminal
Low-side Supply Voltage V
CCL
-0.5 ~ 20 V
Voltage that can be applied between COM
and V
CCL
terminal
High-side Bias Supply Voltage
V
B(U)-COM
V
B(V)-COM
V
B(W)-COM
-0.5 ~ 620 V
Voltage that can be applied between VB(U)
terminal and COM, VB(V) terminal and
COM,VB(W) terminal and COM.
High-side Bias Voltage for IGBT
Gate Driving
V
B(U)
V
B(V)
V
B(W)
20 V
Voltage that can be applied between U
terminal and VB(U) terminal , V terminal and
VB(V) terminal , W terminal and VB(W)
terminal.
Input Signal Voltage V
IN
-0.5 ~ V
CCH
+0.5
-0.5 ~ V
CCL
+0.5
V
Voltage that can be applied between COM
and each IN terminal
Input Signal Current I
IN
3 mA
Maximum input current that flows from IN
terminal to COM
Fault Signal Voltage V
FO
-0.5 ~ V
CCL
+0.5 V
Voltage that can be applied between COM
and VFO terminal
Fault Signal Current I
FO
1 mA
Sink current that flows from VFO to COM
terminal
Over Current Sensing
Input Voltage
V
IS
-0.5 ~ V
CCL
+0.5 V
Voltage that can be applied between IS and
COM terminal
Maximum Junction Temperature
of Control Circuit Block
T
j
+150

C
Maximum junction temperature of the
control circuit block
Operating Case Temperature T
c
-40 ~ +125  C
Operating case temperature (temperature of
the aluminum plate directly under the IGBT
or the FWD)
Storage Temperature T
stg
-40 ~ +125

C
Range of ambient temperature for storage
or transportation, when there is no electrical
load
Isolation Voltage V
iso
AC 1500 Vrms
Maximum effective value of the sine-wave
voltage between the terminals and the heat
sink, when all terminals are shorted
simultaneously. (Sine wave = 60Hz / 1min)
Table 1-2 Absolute Maximum Ratings at Tj=25

C,Vcc=15V (Continued)