Frymaster BIELA14-T Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 56 / 82

5-8
DISPLAY ACTION
3. Select LEFT VAT or RIGHT VAT for split vats.
4. Select DISPOSE OIL.
DISPOSE OIL?
5. Press the √ (check) button to continue. If the X button is selected, the
user returns to the filtration menu.
BULK TANK FULL?
6. This message is only displayed if the bull tank is full. Press the √
(check) button to acknowledge and call the bulk oil waste provider.
The display returns to OFF.
DRAINING IN PROGRESS 7. No action required as oil drains into filter pan.
VAT EMPTY? 8. Once the vat is empty, press the √ (check) button to continue.
CLEAN VAT COMPLETE?
9. Clean the vat with a scrub brush and when complete press the √
(check) button to continue.
OPEN DISPOSE VALVE
10. Open the left cabinet door and unlock the valve if necessary. Pull the
dispose valve completely forward to start disposal.
DISPOSING
11. No action is required while the pump transfers the waste oil from the
pan to the bulk oil waste tanks for four (4) minutes.
REMOVE PAN
12. Carefully pull the filter pan from the fryer.
DANGER
Open the filter pan slowly to avoid splashing of hot oil that
may cause severe burns, slipping and falling.
IS PAN EMPTY?
13. If the filter pan is empty press the √ (check) button. If the pan is not
empty, press the X button and return to step 11 after inserting the
filter pan.
INSERT PAN 14. Insert the filter pan.
CLOSE DISPOSE VALVE
15. Close the dispose valve by pushing the valve handle toward the rear of
the fryer until it stops. Relock the valve if required by your manager.
FILL VAT FROM BULK?
16. The vat is ready to be refilled with oil. Press the √ (check) button to
continue otherwise press the X button to exit to step 20.
START FILLING?
PRESS AND HOLD
17. Press and hold the button to fill the vat. The bulk oil refill pump uses a
momentary switch. It only pumps as long as the switch is depressed.
RELEASE BUTTON WHEN FULL 18. Release the button when the vat is filled to the lower fill line.