manualshive.com logo in svg

Frymaster BIELA14-T Series, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Frymaster BIELA14-T Series Скачать руководство пользователя страница 10

2-1

 

BIELA14-T SERIES GEN III LOV™ ELECTRIC FRYER  

CHAPTER 2:  INSTALLATION INSTRUCTIONS 

 

 

2.1 

General Installation Requirements

 

 

Proper installation is essential for the safe, efficient, trouble-free operation of this appliance.   

 

Qualified, licensed, and/or authorized installation or service personnel, as defined in Section 1.6 of this 
manual, should perform all installation and service on Frymaster equipment.  

 

Failure to use qualified, licensed, and/or authorized installation or service personnel (as defined in Section 
1.6 of this manual) to install or otherwise service this equipment will void the Frymaster warranty and may 
result in damage to the equipment or injury to personnel. 

 

Where conflicts exist between instructions and information in this manual and local or national codes or 
regulations, installation and operation shall comply with the codes or regulations in force in the country in 
which the equipment is installed. 

 

Service may be obtained by contacting your local Frymaster Authorized Servicer. 

 

 DANGER 

Building codes prohibit a fryer with its open tank of hot oil being installed beside an open flame of any type, 
including those of broilers and ranges. 

 

NOTICE 

All fryers shipped without factory supplied cords and plug assemblies must be hardwired using flexible 
conduit to the terminal block located on the rear of the fryer.  These fryers should be wired to NEC 
specifications.  Hardwired units must include installation of restraint devices. 

 

 DANGER 

Adequate means must be provided to limit the movement of this appliance without depending on or 
transmitting stress to the electrical conduit.  A restraint kit is provided with the fryer.  If the restraint kit is 
missing contact your local Frymaster Authorized Servicer (FAS). 

 

NOTICE 

If this equipment is wired directly into the electrical power supply, a means for disconnection from the 
supply having a contact separation of at least 3-mm in all poles must be incorporated in the fixed wiring. 

 

NOTICE 

This equipment must be positioned so that the plug is accessible unless other means for disconnection from 
the power supply (e.g., a circuit breaker) is provided. 

 

NOTICE 

If this appliance is permanently connected to fixed wiring, it must be connected by means of copper wires 
having a temperature rating of not less than 167°F (75°C). 

 

NOTICE 

If the electrical power supply cord is damaged, it must be replaced by a Frymaster Authorized Servicer or a 
similarly qualified person in order to avoid a hazard. 

 

 DANGER 

This appliance must be connected to a power supply having the same voltage and phase as specified on the 
rating plate located on the inside of the appliance door. 

 

Содержание BIELA14-T Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды