Fronius TXi TWIN, Руководство по эксплуатации

Страница: 57 / 68

57
EN
-U
S
Insert the torch body into the torch-body rack.
Position the sensor in relation to the cylinder head screw so that the sensor detects
the screw, but not the coding ring (without screw).
IMPORTANT! The sensor must not touch the cylinder head screw!
Tighten the front jam nut
size 19 mm, tightening torque = 5 Nm
Tighten the rear jam nut
size19 mm, tightening torque = 5 Nm
The same procedure applies for the 2 other torch body sensors.
6
6
5
8
7
5 Nm
5 Nm
5
6
7
8