Fronius TXi TWIN, Руководство по эксплуатации

Страница: 9 / 68

9
EN
-U
S
The device must be examined at least once a week for externally detectable damage and
functionality of the safety devices.
Maintenance and
repair
It is impossible to guarantee that bought-in parts are designed and manufactured to meet
the demands made of them, or that they satisfy safety requirements.
- Use only original spare and wearing parts (also applies to standard parts).
- Do not carry out any modifications, alterations, etc. to the device without the manufac -
turer's consent.
- Components that are not in perfect condition must be replaced immediately.
- When ordering, please give the exact designation and part number as shown in the
spare parts list, as well as the serial number of your device.
The housing screws provide the ground conductor connection for earthing the housing
parts.
Only use original housing screws in the correct number and tightened to the specified
torque.
Safety Inspection The manufacturer recommends that a safety inspection of the device be performed at least
every 12 months.
A safety inspection by a certified electrician is recommended:
- after changes
- after alterations
- after repair, care, and maintenance
- at least every 12 months.
For the safety inspection, follow the appropriate national and international standards and
guidelines.
You can obtain more information about the safety inspection and calibration from your ser -
vice center. The service center will provide the necessary documents upon request.
Disposal Do not dispose of this device with normal domestic waste! To comply with the European
Directive on Waste Electrical and Electronic Equipment and its implementation as national
law, electrical equipment that has reached the end of its life must be collected separately
and returned to an approved recycling facility. Any device that you no longer require must
be returned to your dealer, or you must locate the approved collection and recycling facil -
ities in your area. Ignoring this European Directive may have potentially adverse affects on
the environment and your health!
Safety symbols Devices marked with the CSA test mark satisfy the requirements of the relevant standards
for Canada and the USA.
Data backup The user is responsible for backing up any changes made to the factory settings. The man -
ufacturer accepts no liability for any deleted personal settings.
Copyright
Copyright of these Operating Instructions remains with the manufacturer.