Fronius TXi TWIN, Руководство по эксплуатации

Страница: 19 / 68

19
EN
-U
S
(9) Locking pin
To manually open the pneumatic cover:
- Pull out the pin - the pneumatic cover can be opened
- To lock the cover in place, rotate the pin 90°
- When closing the cover, make sure the pin is back in its original position.
(10) Holder retainer
To hold up to 8 torch-body racks
(11) Fixing bracket
For mounting add-on devices
(12) Compressed air connection "B"
Connection used for supplying the Fronius add-on devices with compressed air
(wire cutter, welding torch cleaning devices)
(13) I/O connection for add-on devices
To connect the Fronius add-on devices to the torch body change station
Operating con -
trols, connec -
tions and
mechanical com -
ponents of the
wall-mounted
console
(1) Torch-body racks
(2) Front cover
(3) Robacta TX pneumatic cover
(4) Ring bolt for transporting by crane
(5) Compressed air maintenance unit
In preparation for the installation of an optional interface to connect to the robot
controller
(6) Compressed air connection for wire cutter
(7) Compressed air connection "A"
Size: 3/8" (0.375 inch)
Connection for supplying the torch body change station with 6.00 bar (87.02 psi) of
dry and oil-free compressed air
(1) (2)
(3)
(4) (5) (6) (7) (8)
(9)