Fronius TXi TWIN, Руководство по эксплуатации

Страница: 32 / 68

32
Mounting the
wall-mounted
console TXi TWIN
WARNING!
Risk of serious injuries due to mechanically moving parts and escaping com -
pressed air.
► Before beginning any work, disconnect the compressed air supply line for the torch
body change station from the compressed air supply.
► Ensure that the compressed air supply line remains depressurized until all work is com -
pleted.
► Ensure that the compressed air supply line for the wirefeeder remains depressurized
until installation and commissioning are completed.
WARNING!
Toppling or falling devices can be deadly.
► Only secure devices to vertical walls or suitable mounting fixtures.
► At least 2 people are needed to install the device.
NOTE!
Depending on the surface, different mounting materials may be required to mount
the device.
These mounting materials are not part of the scope of supply for the device. The installer
is responsible for selecting the proper mounting materials.
The mounting bracket can either be fitted to the rear of the device or the right-hand side of
the device:
Installation on the rear of the device Installation on the right-hand side of the device
Remove the mounting bracket from pallet and wall-mounted console
Select an mounting option
Drill the correct hole pattern into the wall using the mounting bracket that corresponds
to the mounting method that you have selected
Mount the mounting bracket on the wall-mounted console
Tightening torque between the mounting bracket and the wall-mounted console:
20 Nm per screw
Fit the wall-mounted console with mounting bracket to the wall
20 Nm
20 Nm
1
2
3
4
5