Fronius 4,044,008, Руководство по эксплуатации

Страница: 54 / 136

54
Preparing the torch body with plastic inner liner
Preparing the
torch body
Insert the inner liner from the original
equipment kit of the hosepack being
used (1) as far as it will go into the torch
body
Push the cutting aid (2) as far as it will
go onto the inner liner
Tighten the locking screw (3) of the
cutting aid
Pull the inner liner (1) and cutting aid
(2) out of the torch body
- do not change the position of the
cutting aid on the inner liner
Cut off the inner liner at the end of the
cutting aid (2) using a knife
Deburr the inner liner at both ends
(1) (3)
(2)
1
2
3
4
(2)
5
6