Fronius 4,044,008, Руководство по эксплуатации

Страница: 123 / 136

123
EN
Undo cable tie (3)
Unplug the plug from the PC board ac-
cording to the position of the rack hol-
der. In this case (4)
Example:
- Torch body rack mounted at posi-
tion 2 on the rack holder - unplug
the torch body sensor at connecti-
on 'X3 sensor 2' on the PC board
in the torch body changeover sta-
tion
Remove the cable tie (5)
Undo screw (6)
- using a 4 mm Allen key
Feed out the sensor cable from the
torch body changeover station
Unscrew the torch body sensor (7)
from the torch body rack
Fitting the new
torch body sen-
sor
Screw the new torch body sensor into
the torch body rack until it reaches the
dimension shown
Tighten screw (1)
- using a 4 mm Allen key
Fix the sensor cable to the torch body
rack using the cable tie (2)
(4) (3)
3
4
(6) (5) (7)
5
6
7
8
(2) (1)
8 mm 0.31 in.
1
2
3