Frigidaire LGUB2642LF2, Руководство по обслуживанию

Страница: 48 / 187

4-4
Diagnostic Service Mode
Activation
Express-Select™
To activate the Ice Maker Service Diagnostic Mode,
press and hold fresh food and freezer up (
∧ )
simultaneously for up to ten (10) seconds.
Pro-Select™
To activate the Ice Maker Service Diagnostic Mode, press
and hold ‘options’ and ‘power on-off’ simultaneously for
up to ten (10) seconds.
Activation of Ice Maker Service Diagnostic Mode
automatically turns off all Ice Maker Control PCBA
outputs. The compressor runs at fixed speed of 4500
rpm and the condenser fan turns on until Service Mode
is deactivated. The damper is closed and the fresh food
and freezer lights are enabled as well as the alarm audio.
Defrost of the main system is not allowed.
Deactivation
Express-Select™
To exit service mode, press and hold fresh food (
∧ ) for
up to 10 seconds.
Pro-Select™
To exit service mode, press and hold the (+) key for up
to 10 seconds.
Service mode is also automatically deactivated after 5
minutes of no key entries (that includes Communication
Lost). All outputs are turned Off. Previously selected
main system and ice maker operational modes are
restored.
Testing
To actuate an ice maker load of the selected test step
(turn on or off), use ‘power on-off’ on the user interface.
To step to the next ice maker sequential test, press fresh
food (
∧ ) or ‘+’ on the LCD screen. To step back to the
previous ice maker sequential test, press fresh food ( ∨ )
or ‘–’ on the LCD screen. The selected test number will
be displayed on the fresh food display.
The Ice Maker must be turned on before entering the
Service Mode. Check the ‘ice off’ indicator on the User
Interface to verify that the ice maker is in on.
Ice Maker (Flex Tray Fresh Food Compartment)
After pushing ‘power on-off’ to start automatic test
or turn on the load, the ice maker control will display
the test result on the freezer two digit display. When
waiting for the test to be automatically performed and
the result displayed, the test number (test ID) will flash
on/off. After the automatic test is completed the test
result will be displayed as “P” – pass, or “F” – Fail.
For an interactive test, the technician manually activates
the load using ‘power on-off’ and physically verifies the
system response. Pressing ‘power on-off’ again turns
the load off. The freezer display shows the current or
expected state of the load. During the load transition
the fresh food display flashes the test ID. After the last
test step in the ice maker test sequence is completed,
the next advancing action will scroll back around to the
first ice maker test. Stepping back from the first test, will
scroll the test sequence backwards to the last test in the
sequence.
Note: The only test that the test number will flash during
the test is the bail arm test.
Note: If you advance to another test before the present
test is completed the ice maker will continue to run until
the tray reaches the home position before the next test
will start.
Service Diagnostic Mode Test
Sequence
Test 52C: Ice maker Thermistor Test.
The current Thermistor temperature is displayed on
Freezer display when the test is started. It will show the
temperature at the ice maker if the thermistor is good.
A “OP” will be displayed for open and “SH” for in short
circuit condition of the ice maker thermistor.
Test 55C: Water Valve Test
NOTE: Prior to initiating this test, verify that the ice tray
is empty. If not, empty the ice tray to prevent water
from overflowing into the ice bucket. To empty the ice
tray, remove the ice bin, place catch pan under the ice
tray and initiate test 63C. The tray will twist and empty.
Touch ‘power on-off’ to start the test. The lower control
board will turn on the green and brown water solenoid
valves for a duration of 4.6 seconds if set for small cubes,
5.8 seconds if set for medium cubes or 7.0 seconds if set
for large cubes. Additional ‘power on-off’ activations are
ignored. If you want to re-run the test you will need to
advance to another test and then go back after you drain
the water out of the tray.