Frigidaire FFH17F8HW0, Обслуживание

Страница: 37 / 54

Before continuing, please take note of the WARNINGS and CAUTIONS below.
- If it is necessary to remove a Freezer unit from its installation, use proper lifting techniques as units are heavy
and could fall resulting in serious injury or death. Pulling a unit from its installation should only be performed
by a trained authorized service technician or installer.
- To avoid electric shock, power to a freezer unit must be disconnected whenever accessing/ removing
components powered by electricity or components near other electrical components.
- After service is completed, be sure all safety-grounding circuits are complete, all electrical connections are
secure, and all access panels are in place.
- If unit was used prior to service, the Compressor assembly will be hot. Wear protective gloves and the
appropriate safety gear when working with compressors.
- If removing a door or drawer from a unit, remember that the doors and drawers are heavy. If they were to
fall, they could cause serious personal injury.
WARNING
- Metal edges may be sharp. Use caution and wear appropriate safety equipment when servicing
evaporators and condensers to avoid personal injury.
- If working in the compressor area, remember that compressor and tubing may be hot.
CAUTION
Section 5 Component Teardown
5-1
Component Teardown
This section explains how to access and remove components from a Kenmore Freezer, and has been arranged
in such a way as to simulate which components would need to be removed first in order to gain access to other
components. When following a component removal procedure, it may be necessary to reference another
component removal procedure listed earlier in this section.
IMPORTANT