Frigidaire FFH17F8HW0, Обслуживание

Страница: 11 / 54

Section 2 Installation Information
2-3
Location
1. Choose a place that is near a grounded electrical
outlet. Do Not use an extension cord or an adapter
plug.
2. If possible, place the refrigerator/freezer out of
direct sunlight and away from the range, dishwasher
or other heat sources.
3. The refrigerator/freezer must be installed on a floor
that is level and strong enough to support a fully
loaded refrigerator/freezer.
4. Consider water supply availability for models
equipped with an automatic ice maker.
5. The refrigerator/freezer should be located where
surrounding temperature will not exceed 110ºF
(43ºC).
6. For ease of installation, proper air circulation and
electrical connections, see Figure 2-1 for
recommended clearances.
7. For dynamic condenser models, DO NOT block
the toe grille on the lower front of your freezer.
Sufficient air circulation is essential for the proper
operation of your freezer.
Leveling
The freezer must have all bottom corners resting firmly
on a solid floor. The floor must be strong enough to
support a fully loaded freezer.
It is VERY IMPORTANT for your freezer to be level in
order to function properly. If the freezer is not leveled
during installation, the door/lid may be misaligned and
not close or seal properly, causing cooling, frost or
moisture problems.
To Level Unit:
After discarding crating screws and wood base, use a
carpenter’s level to level the freezer from front to back.
Adjust the plastic leveling feet in front, ½ bubble higher,
so that the door closes easily when left half way open.
Figure 2-1. Installation Clearances
Figure 2-2. Leveling Unit
The exterior walls of the refrigerator/freezer may
become quite warm as the compressor works to transfer
heat from the inside. Temperatures as much as 30°F
warmer than room temperatures can be expected.
NOTE