Franklin Electric 5870205003C, Руководство пользователя

Страница: 37 / 136

SubDrive/MonoDrive Connect
37
Specifications – MonoDrive/MonoDriveXT
MonoDrive MonoDriveXT
Model No.
NEMA 3R
(indoor/outdoor)
5870205003C 5870205203C
Input from
Power Source
Voltage 208/230 +/- 10% VAC 208/230 +/- 10% VAC
Phase In Single-Phase Single-Phase
Frequency 60/50 Hz 60/50 Hz
Current (max) 11A 16A
Power Factor ~ 0.95 ~ 0.95
Power (idle)* 4 W 5 W
Power (max) 2.5 kW 4.2 kW
Wire Gauge Size(s)
See Table 1, pg. 18. Consult Federal, State, and Local codes for branch
circuit installations See Table 1, pg. 18. Consult Federal, State, and Local codes for branch circuit
installations
Output to Motor
Voltage Variable based on frequency Variable based on frequency
Phase Out Single-Phase, (3-Wire) Single-Phase, (3-Wire)
Frequency Range 30-63 Hz 30-63 Hz
Current (max) 10.4 A 13.2 A
Wire Gauge Size(s) See Table 2, pg. 19 for wire sizing See Table 2, pg. 19 for wire sizing
Pressure Setting
Factory Preset 50 psi (3.4 bar) 50 psi (3.4 bar)
Adjustment Range
Analog Transducer: 5-95 PSI (0.3 - 6.6 bar)
Pressure Sensor: 25-80 psi (1.7 - 5.5 bar) Analog Transducer: 5-95 PSI (0.3 - 6.6 bar)
Pressure Sensor: 25-80 psi (1.7 - 5.5 bar)
Operating
Conditions
(A)
Temperature
(at 230 VAC input)
-13 °F to 122 °F (-25 °C to 50 °C) -13 °F to 122 °F (-25 °C to 50 °C)
Relative Humidity 20-95%, non-condensing 20-95%, non-condensing
Controller Size
(B)
(approximate)
NEMA 3R
9-3/4" x 16-3/4" x 5-1/4" : 20 lbs
(25 x 42.5 x 13 cm) : (9 kg) 9-3/4" x 19-3/4" x 5-1/4" : 26 lbs
(25 x 50 x 13 cm) : (11.8 kg)
For Use With
Pump (60 Hz)
0.5 hp (0.37 kW) pump with 214505-series motor
0.75 hp (0.55 kW) pump with 214507-series motor
1.0 hp (0.75 kW) pump with 214508-series motor
0.5 hp (0.37 kW) pump with 214505-series motor
0.75 hp (0.55 kW) pump with 214507-series motor
1.0 hp (0.75 kW) pump with 214508-series motor
1.5 hp (1.1 kW) pump with 224300-series motor
2.0 hp (1.5 kW) pump with 224301-series motor
FE Motor
214505-series (0.5 hp, 0.37 kW) single-phase, 3-wire
214507-series (0.75 hp, 0.55 kW) single-phase, 3-wire
214508-series (1.0 hp, 0.75 kW) single-phase, 3-wire
214505-series (0.5 hp, 0.37 kW) single-phase, 3-wire
214507-series (0.75 hp, 0.55 kW) single-phase, 3-wire
214508-series (1.0 hp, 0.75 kW) single-phase, 3-wire
224300-series (1.5 hp, 1.1 kW) single-phase, 3-wire
224301-series (2.0 hp, 1.5 kW) single-phase, 3-wire
Notes:
(A) Operating temperature is specified at full output power when installed as described in Location of Drive on pg. 10-14.
(B) Refer to pg. 23-26 for detailed Drive Mounting.
* Idle power is defined as input power used by the drive when the drive is not running the motor, the drive fan is off,
and no communication is active. Idle power is increased by 1 W if Wi-Fi is on.