FPM Agromehanika 408 D Скачать руководство пользователя

Страница: 23 / 66

grounding masses and then it will stop.

a) START POSITION - Press the safety lever

(Pic. 19, pos.1) and start the clutch lever

(Pic. 19, Item 3), and lock with the locking

device (Pic. 19, Item 4).

b) OPERATING POSITION - For operation

with the cultivator, the safety lever (Pic. 19,

Item 1) must be pressed downwards -

grasp by hand.

Picture 19

DANGER: Do not bind the safety lever.

The safety lever also serves as an off-switch (engine switch) in case of danger. Then you need

to release the safety lever and it will come to the "STOP" position itself.

CAUTION:

After each intervention on the engine, it is necessary to perform, checking the

function of the safety lever. Checking is done as follows.

- When the safety lever is released, the engine will not start.

- When the engine is in operation and you release the safety lever, the engine

must be off.

- Be sure to check the correctness of the lever function and, if

necessary, replace the torn and damaged parts.

STARTING THE ENGINE

- STARTING THE COLD ENGINE -

After doing the previously described actions, you can start the engine. In order for the engine to start

easily, it is necessary to:

- set the gas lever (Picture 4, item 5) to the position of 2/3 of full gas.

- withdraw the Extra Charging Command (see Picture 20, Item A)

- wrap the rope for starting on the belt (see Pic. 21), in the direction of the arrow on the belt.

CAUTION:  Slightly  pull  the  cord
and bring the belt to the starting
position (bring the arrow on the
belt  into  the  box  marked  with
red),  and  re-thread  the  cable
into the belt.

Picture 20

Содержание 408 D



































































Результаты поиска

Содержание 408 D

Отзывы:

Похожие инструкции для 408 D

Бренды по названию

Популярные бренды

FPM Agromehanika 408 D, Установка/Обращение/Обслуживание

Результаты поиска

Содержание 408 D

Отзывы:

Похожие инструкции для 408 D

Бренды по названию

Популярные бренды