FPM Agromehanika 408 D Скачать руководство пользователя страница 30

Страница: 30 / 66

Picture 29

Picture 29b

For safe driving with a trailer, the following necessary:

a) - 1 pair of drive rubber wheels with tires 5.00x12 "

b) - 1 pair of wheel extensors, Art. number 501 93 110

c) - 1 pair of extra weights for wheels, art. number 501 93 111

d) - trailer for articulated trailer. number 502 20 060

e) - trailer with drive wheels FPM 807 232

INSTALLATION

1. - Adjust the steering column so that the engine moves forward, viewed in the direction of travel.

2. - Attach drive wheels to wheel extensors (wheel distance 625 mm).

3. - Connect the machine to the trailer with drive wheels.

CAUTION: Fixing pin (see Pic. 29a, item 1), must be correctly positioned in its place and secured
by a spring plug - fuse (see Pic. 29b, item 3).

1. Pull the universal joint to the pivot shaft (see Pic. 29b, item 1), whereby the button for

securing (locking) should be pressed (see Pic. 29b, item 2). Then release this button and push

the cardiac wrist so far until the guard shaft comes up (what can you hear). In order to connect

the cardan shaft more easily, move the steering wheel arms to one side or the other, and pull
out the cardan shaft slightly.

2. Release the trailer support (stop) and position it in the upper position, return the shaft to its

place and secure it with a fuse.

3. The trailer is ready to ride.

DRIVING

The drive axle of the trailer serves to increase tractive power in difficult conditions, for example:

in arable or damp forest and field roads.

DANGER: FOR SAFETY, WITH INCLUDED LOCKING EFFICIENCY, YOU CAN DRIVE ONLY
IN FIRST AND SECOND GEAR AND BACKWARD.

The use of trailer in the third level of transmission is uneconomical and harmful.

A) .- Drive with off drive axle.

1. - Pull the wheel lock lever (Pic. 11a, pos. A) to the rear, (according to the operator), allowing

the wheels to turn freely

2. - Set the change lever to position "0".

3. - Start and warm the engine (see "Starting the engine" section).
4. - Turn on 1 - R - 2 - 3 gear:

Figure 29a

Содержание 408 D



































































Результаты поиска

Содержание 408 D

Отзывы:

Похожие инструкции для 408 D

Бренды по названию

Популярные бренды

FPM Agromehanika 408 D, Установка/Обращение/Обслуживание

Результаты поиска

Содержание 408 D

Отзывы:

Похожие инструкции для 408 D

Бренды по названию

Популярные бренды