FPM Agromehanika 408 D Скачать руководство пользователя страница 6

Страница: 6 / 66

movement) and a lower shaft with an independent speed of 818 min-1 at 3000 engine rotations, which

allows each work to be performed with the most economical speed.

The universal gearbox can be used to aggregate gamma connection devices as follows:

- transmission with rotors

- universal connection for connection:

- plough

- reversible plough

- ridger

- two-sided ridger

- liner (working grasp 0.70 - 1.25 m)
- potato machines

- rotary plow with a drive

from the output shaft to the tool

- drive mechanism for mower cutting machines, working grasp 1.05 m; 1.30 m and 1.60 m.

- rotary mower for parks (Ø 800 mm)

- strips

- irrigation pump

- rotary adjustable brush (1.25 m)

- snow throwing dredger (1.25 m)

- snow thrower (working width 0,80 m)
- caravan trailer for transport of cargo (carrying capacity 1000 kg)

- cutting knife sharpener

- drive pulley to drive stationary terminals

- sprayer

- atomizer

The aggregation of connecting tools is simple and quick, and can be performed by one person.

Prior to using the motocultivator, it is advisable for the users to carefully examine all the INSTRUCTIONS

from this manual. Only good knowledge and practical application of these instructions allows the

motocultivator to always be ready and safe to use and operate and its lifetime is long.

SAFETY

Most accidents occur during operation, maintenance, and transportation as a result of failure to comply

with basic safety requirements. For this reason, you are the most important person for the operation and

maintenance of your machine and attachment tools, whether you are working with your family members

or other persons, be sure to read and respect the basic procedures with the motorcultivator that you and

others should hear. Additionally, the motocultivator has labels with warnings that should draw your

attention to compulsory safety compliance.

- Before the start of operation, the operator must be absolutely familiar with the functioning of all parts of

motocultivator - during the course of operation, it can be too late.

- The stated instructions for handling, maintenance and safety at work must be unconditionally complied

with.

Содержание 408 D



































































Результаты поиска

Содержание 408 D

Отзывы:

Похожие инструкции для 408 D

Бренды по названию

Популярные бренды

FPM Agromehanika 408 D, Установка/Обращение/Обслуживание

Результаты поиска

Содержание 408 D

Отзывы:

Похожие инструкции для 408 D

Бренды по названию

Популярные бренды