FPM Agromehanika 408 D, Установка/Обращение/Обслуживание

Страница: 26 / 66

them well, tighten them tightly on the poles of the battery and lubricate them with technical vaseline
(no other lubricant can be used).
When removing the battery, first remove the clamp of the negative pole (connected to the ground)
and then the clamp of the positive pole. When placing the battery, first connect the clamp of the
positive pole, then connect the terminal pole - ground terminal.
MAIN SWITCH WITH A KEY
It is located on the instrument box (Picture 20.2, Item 2). The bottom plate shows the connections at
different key positions.
To operate this switch, a special key (see picture right) is required, which is supplied with the FPM
414 DE motocultivator.
By placing the key in the zero position (key pressed), turning on the wheel of the circuit will illuminate
on the control panel the oil pressure indicator and charging the battery, and the starter.
Turning the key to the right side of the "1" position lights the headlights, and all the elements from the
zero position have been switched on in the circuit.
Turning the key to the right side to position "2" and position "3" all other elements in the circuit of
circuits are turned on as in the "1" position.
KEY
POSITION KEY PRESSED
- placed in the circuit of
the current -
KEY PULLED OUT
0 Signal oil pressure lamps
and battery chargers,
electric starter.
Circuit is broken
1
As in position 0 and:
headlights
2
3