51
11-9
Settings File
As described in section 3-5 there are two folders stored inside of the Truck Pro: Settings and
Sounds. The Settings folder contains a file called: settings.dat. This file has specific instructions
inside that control different parameters for the Truck Pro operation. The following table shows
the different parameters and their possible values.
You are welcome to modify the values within the given value specifications as indicated within
the table below.
Parameter
Description / Values
ADDR
Sets the channel of operation. Possible values are 0 – 15. Must
be set to the same channel of operation as the Truck Pro
remote control.
RELEASE
PLMDA
PLMDB
SPKRMD
EXRT
Extended run time. Value 0 sets the low voltage cutoff
threshold to 11.5V. A value of 1 will set the low voltage cutoff
threshold to 10.5V
GRIPID
Displays the ID for the FOXGRIP II that you have paired with the
Truck Pro.
PR1SND
Displays the sound number of the sound you have set as preset
1. This is the sound that is triggered by button 1 on the
FOXGRIP II.
PR1VOL
Displays the volume level of preset 1.
PR2SND
Displays the sound number of the sound you have set to preset
2. This is the sound that is triggered by button 2 on the
FOXGRIP II.
PR2VOL
Displays the volume level of preset 2.
12.
Creating FOXCAST Sequence Files
This section will provide you with detailed information on creating and installing FOXCAST
sequence files in your Truck Pro digital game caller.
12-1 Creating FOXCAST Sequences Manually
This process requires some basic computer operations experience. If you are not very
experienced with computers, it is recommended that you seek help prior to performing any of
the following steps.
A FOXCAST sequence file is a simple text based file that contains unique instructions to guide
your Truck Pro through a stand. These instructions include commands to change the sound,
