13
not leave the speakers permanently mounted to your truck as they are not considered 100%
waterproof and water damage is not covered by warranty. When you are not using the Truck
Pro, it is recommend that you disconnect the speakers and store them inside your vehicle to
prevent excessive exposure to the elements.
2-2 Powering On the Truck Pro
The Truck Pro is powered-on by moving the power switch to the on position. When the device is
powered-on, the orange LED pilot lamp will blink one time and then illuminate, signaling that it
is ready to be operated from the remote control.
2-3 Truck Pro Remote Setup
After installing batteries or changing batteries in the Truck Pro remote, it is recommended that
you make it a routine to take a moment to setup the date and time settings. This section will
explain these setup configurations.
Setting the Clock:
1.
Access the Back Menu by pushing the Back/Menu button.
2.
Access the Date/Time(r) menu and select “Time”
3.
Use the scroll buttons to set the current time.
4.
Push “Play/Select” to lock it in.
The clock can be displayed in either the standard 12 hour format or 24 hour format (military
time).
Configuring Time Format:
1.
Access the Back Menu by pushing the Back/Menu button.
2.
Access the Date/Time(r) menu and select “Time Format”
3.
Use the scroll buttons to select either 12 or 24 hour time format.
4.
Push “Play/Select” to lock in the setting.
The bottom status line of the Truck Pro display can show either the current time or the stand
timer. The stand timer will only be displayed if it is turned on—otherwise, the clock will show
the current time.
IMPORTANT NOTE
The Truck Pro remote control features a moon phase indicator. In order to display
the correct moon phase, it is imperative that you enter the correct date.
Otherwise, the displayed information may not be correct.
Setting the Date:
1.
Access the Back Menu by pushing the Back/Menu button.
