40
channel for the Truck Pro digital game call—otherwise the two devices will not be able to
communicate.
Changing the Radio Channel:
1.
Access the TX1000 Settings menu and select “Radio Channel”
2.
Cycle through the available channels using the scroll buttons.
3.
When the proper channel is set, push the “Play/Select” button to lock it in.
IMPORTANT NOTE
Do not change the radio channel on the remote control without also changing it on
the Truck Pro. Doing this will result in a loss of communication. To change the
channel on the Truck Pro, please see Chapter 3 Section 3-5.
9-2 Download List
Any time you reprogram the Truck Pro digital game call to add new sounds or new FOXCAST
sequence files, you must download a new copy of the play list to the Truck Pro remote. This
menu item will guide you through that process. The entire programming process is covered in
more detail later in the manual.
IMPORTANT NOTE
While performing the Download List operation, make sure that you DO NOT push
either of the buttons on the FOXGRIP II. Doing so will cause the operation to fail
and the sound list will fail to transfer.
9-3 AUX
The auxiliary jack operation specifications can be changed for either momentary or latched. All
FOXPRO Jack Predator Decoys require that the jack be setup for momentary.
Configuring the Auxiliary Setting:
1.
Access the TX1000 Settings menu and select “AUX”.
2.
Cycle through the two options using the scroll buttons.
3.
When the appropriate setting is selected, push the “Play/Select” button to lock it in.
IMPORTANT NOTE
Some third party decoys may require latched operation as opposed to momentary.
A detailed list of other products and their specific requirements is not maintained
by FOXPRO. You will need to check with the equipment manufacturer to
determine if it is compatible and what the requirements are.
