16
Pairing the FOXGRIP II with the Truck Pro:
Make sure that you have fresh batteries in the Truck Pro remote and FOXGRIP II and that the
Truck Pro is turned on prior to trying the following steps. Before you can use the FOXGRIP
II
with the Truck Pro, you must pair the two devices together.
1.
Turn on the Truck Pro remote control.
2.
Turn on the Truck Pro.
3.
Enter the main menu on the Truck Pro remote control.
4.
Select “FoxFeatures” menu.
5.
Select the “FoxGrip” parameter. A confirmation message is displayed informing you to
verify that the Truck Pro is powered on. If you are sure the Truck Pro is turned on,
select “OK”.
6.
A prompt will appear instructing you to activate FOXGRIP. At this time, push and
release button 1 on the FOXGRIP II. Upon pushing button 1, the synchronization
process begins. In this process, specific configurations are written to the Truck Pro so
that it learns how to react to the button pushes from the FOXGRIP II.
Once
synchronization has started, it is important that you do not press a button on the
FOXGRIP II until the synchronization has completed
.
7.
After the synchronization is complete, the “FoxGrip” menu item will display the
appropriate ID for your FOXGRIP II.
IMPORTANT NOTE
If the synchronization fails, make sure you have a good battery in the FOXGRIP II. It
is also
crucially important to make sure that the Truck Pro is powered on during
this process
.
When using the FOXGRIP II, make sure that you have the FOXGRIP II located within
approximately 10 yards of the Truck Pro. Any distance greater than that may result in failure of
communication. With the Truck Pro turned on, push either button 1 or 2 on the FOXGRIP II to
trigger preset 1 or 2. A subsequent push of button 1 or 2 will result in the preset changing to a
muted state. Please note that if you mute the sound via the FOXGRIP II, the Truck Pro remote
control will not be aware of this state change. Because of this, if you wish to take over
operations from the Truck Pro remote you will need to push the mute button twice on the
Truck Pro to regain control from a FOXGRIP II induced mute state. If you press and hold either
button 1 or button 2 for ¾ of a second, this will result in the preset restarting.
IMPORTANT NOTE
If you change the presets on your Truck Pro remote, you must perform the
FOXGRIP II pairing steps in order for the Truck Pro to become aware of the preset
change. If you fail to perform this step, FOXGRIP II activation will result in the
previous presets playing rather than the new presets. Once paired, the Truck Pro
