15
2-5 Using Presets/Favorites
The Truck Pro remote is capable of storing up to 50 unique presets or favorites. A preset is a
shortcut to a particular sound which has a defined volume level. The Truck Pro remote has 4
quick access preset buttons located on the top left and right.
By default, your Truck Pro remote will have no presets established. The following instructions
will describe how to setup a preset:
To Create a Preset/Favorite:
1.
From the main screen, select the “Favorites/Presets” menu item.
2.
Select one of the 50 preset slots. Notice that the screen will indicate “Preset
Recording”. The first step is to select the sound.
3.
Use the scroll buttons to highlight the sound you want to establish for this preset and
then push the “Play/Select” button.
4.
The last step is setting the volume level. Use the volume buttons to dial-in the desired
volume level you wish to assign to this preset and then push “Play/Select” to lock it in.
5.
Your preset is now setup.
You can assign the P1, P2, P3, and P4 buttons in the following manner:
1.
Highlight the sound that you wish to have established in one of the four positions.
2.
From the main sounds or category screen, press and hold the P1, P2, P3, or P4 button
for approximately 3-4 seconds.
3.
Set the volume level and then push the “Play/Select” button to lock in that preset.
To initiate playback of a presets 1-4, make sure that both the Truck Pro and Truck Pro remote
are turned on, and then push the corresponding preset button (P1 – P4) on the top sides of the
remote. The Truck Pro will then instantly switch to that sound and volume level.
To initiate playback of any preset, simply select the “Favorites/Presets” menu on the main
screen, browse through the available presets, and then use the “Play/Select” button, just as if
you were picking a sound for normal playback.
Presets can also be managed by editing a specific file located within the Truck Pro remote. For
the advanced information on this process, please view Chapter 10.
2-6 Using the FOXGRIP II Remote
The FOXGRIP II relies upon having presets 1 and 2 setup in the Truck Pro remote. After setting
up presets 1 and 2 per the instructions in section 2-5, continue with the following.