34
5-8 FOXGRIP
This allows you to pair the FOXGRIP II remote with the Truck Pro digital game call. Please see
section 2-6 for instructions pairing the FOXGRIP II with your Truck Pro. Remember, you must
have presets 1 and 2 setup in the Truck Pro remote before you perform the pairing function.
6.
Sound Settings
This chapter explores the sound settings menu and all associated options.
6-1 Volume Step
The Truck Pro remote has a range of volumes from 0 – 40. Increasing the volume in the field by
increments of 1 may be too slow for some and therefore this stepping value is configurable. You
can choose from 1, 2, 3, and 5. The factory default setting is 2.
Changing the Volume Step Value:
1.
Access the Sound Settings menu and select “Volume Step”.
2.
Use the scroll buttons to adjust the value up or down.
3.
When the desired value is set, push the “Play/Select” button to lock it in.
6-2 Primary & Secondary (FOXFUSION) Mode
This setting allows you to configure how the primary and secondary (FOXFUSION) sounds will be
played back through the Truck Pro. There are three modes of playback: Repeat, Single (default),
and Jukebox. In the repeat mode, the sound will loop repeatedly every time it ends. In single
mode, the sound will play one time and stop. In jukebox mode, once the sound has played
through entirely, it will then move on to the next sound in the list.
You can mix the playback modes across the primary and secondary sounds. For example, you
can have one sound repeating on the primary and then have the secondary operate in jukebox
mode stepping through all of the sounds.
Changing the Primary Mode and Secondary Mode:
1.
Access the Sound Settings menu and select either “Pri. Mode” or “Sec. Mode”
(FOXFUSION).
2.
Use the scroll buttons to cycle through the available values.
3.
When the appropriate setting is displayed, push the “Play/Select” button to lock it in.
When using FOXCAST mode or presets for playback, these modes will be overridden.
