41
9-4 View
The Truck Pro remote control can display your sounds either by general listing or by category
listing. Sound categories are the best route to go if you have a large number of sounds.
Configuring Sounds View:
1.
Access the TX1000 Settings menu and select “View”.
2.
Cycle through the two options using the scroll buttons.
3.
When the appropriate setting is selected, push the “Play/Select” button to lock it in.
9-5 Temperature Units
The integrated thermometer can display temperature in either Celsius or Fahrenheit based
upon your preference.
Configuring the Temperature Units:
1.
Access the TX1000 Settings menu and select “Temp Units”.
2.
Cycle through the two options using the scroll buttons.
3.
When the appropriate setting is selected, push the “Play/Select” button to lock it in.
9-6 Barometer Measurement Units
The Truck Pro remote can display barometric pressure readings in either inches or millimeters
depending upon your preference.
Configuring the Barometer Measurement Units:
1.
Access the TX1000 Settings menu and select “Barom Units”.
2.
Cycle through the two options using the scroll buttons.
When the appropriate setting is selected, push the “Play/Select” button to lock it in.
9-7 Elevation
Barometric pressure is the reading provided by a barometer in measuring atmospheric air
pressure. The pressure is not constant, but changes depending upon altitude and weather
conditions. In order to get the most accurate measurement with your Truck Pro remote, it is
recommended that you set the elevation value for your location. Atmospheric pressure is the
greatest at sea level as compared to higher altitudes. To get the best calculation, knowing your
approximate elevation will greatly increase the accuracy.
Setting the Elevation:
1.
Access the TX1000 Settings menu and select “Elevation”.
2.
Cycle through the options until you find the closest match for your location.
3.
When the appropriate value is displayed, push the “Play/Select” button to lock it in.