Förster-Technik TAP5-VS2-50 Скачать руководство пользователя страница 99

Страница: 99 / 130

Faults and warnings

9.2

Warnings

9.2.1

Emptying the mixer

If the mixer cannot be emptied, the message

Warning, draining the mixer

will appear. For ex-

ample, this can be because the drain is clogged or the feeding pump is no longer running.

DANGER!

Fatal electric shock.

The electrical components of the automatic feeder are live.

►

Always switch off the automatic feeder firstly with the Main switch and then disconnect the
power plug before working on components of the feeder.

You rectify the warning as follows:

1. Check all components carrying feed from the mixer to the mixer drain valve or from the mixer

up to the teat for clogs and remove them.

NOTICE!

The hose which goes from the mixer drain valve to the drain channel must not be length-
ened.

2. Check the feeding pump.

2.1.

Confirm

Mixer draining warning

by choosing

2.2.

Confirm

Feeding pump: start?

by choosing

The feeding pump will be actuated.

3. Check the mixer drain valve.

3.1.

Confirm

Mixer draining warning

by choosing

3.2.

Confirm

Mixer drain: open?

by choosing

The mixer will be drained.

4. Check the rod electrode.

4.1.

Visually check the rod electrode for deposits.

4.2.

Check that the rod electrode works properly (see 9.5.3 "Checking sensors" - 110).

5. Fill and drain the mixer.

5.1.

Confirm

Bo. water start?

by choosing

The mixer will fill up with water.

5.2.

Confirm

Mixer: draining?

by choosing

The mixer will be drained.

If the fault has been fixed, acknowledge the message

Delete warning?

in the display with

Содержание TAP5-VS2-50



































































































































Результаты поиска

Содержание TAP5-VS2-50

Отзывы:

Похожие инструкции для TAP5-VS2-50

Бренды по названию

Популярные бренды

Förster-Technik TAP5-VS2-50, Оригинальное сервисное руководство

Результаты поиска

Содержание TAP5-VS2-50

Отзывы:

Похожие инструкции для TAP5-VS2-50

Бренды по названию

Популярные бренды