Transmitter and animal management
77
7.1.5.1
Consecutive assignment of animal numbers
There is a counter which counts up for each new transmitter number as it is read. In this way,
all of the transmitter numbers that are registered by the identification function are linked to con-
secutive animal numbers; e.g., from 1 to 50.
You set up consecutive assignment of animal numbers as follows:
1. Navigate via
> Animal management > Transmitters
to the
New
sub-menu.
2. Select the
consecutive
option in
No.
3. If necessary, in the
next
menu, specify the animal number at which you want automatic
reading of transmitters to start.
Note:
If you use collars, it makes sense to start with 1 and read in the transmitters in order.
7.1.5.2
Assignment of animal numbers based on transmitter numbers
More and more often, calves are already equipped with an electronic earmark transmitter when
they are born and keep this earmark their whole lives. The automatic feeder program has been
adapted for this type of transmitter so that the registration process of the transmitters and calves
can take place completely automatically.
You set up automatic assignment of animal numbers as follows:
1. Navigate via
> Animal management > Transmitters
to the
New
sub-menu.
2. Select the
automatic
option in
No.
3. In the
Range
menu, define the part of the transmitter number that you would like to use as
the animal number. The animal number can have a maximum of six digits.
For example:
5-2
means that, counting from the right, the second to the fifth digits of the
transmitter number will be used as the animal number.
6-1
means that, counting from the
right, the first to the sixth digits of the transmitter number will be used as the animal number.
7.1.6
Editing transmitters or animal numbers
If necessary, (e.g., if a transmitter is lost), a transmitter number can be subsequently changed
or deleted.
7.1.6.1
Changing the transmitter number
Manually changing the transmitter number
You manually change a transmitter number as follows:
1. Navigate via
> Animal management > Transmitters
to the
Edit
sub-menu.
2. Select the transmitter number to be changed.
3. Change the transmitter number in the
No.
menu and confirm by choosing
.
Содержание TAP5-VS2-50
Страница 121: ...Appendix 121 10 4 Standard feeding plans ...
Страница 122: ...122 Appendix ...
Страница 129: ...Index 129 Unknown transmitter 101 Water connection 12 Water pressure 24 Weight 12 ...
