Transmitter and animal management
79
7.1.8
Calling up the transmitter statistics
You call up a transmitter statistic as follows:
1. Navigate via
> Animal management > Transmitters
to the
Information
sub-menu.
2. An overview of the transmitters created in the system is displayed.
2.1.
In the
Registered
menu you check the number of registered transmitters or calves.
2.2.
In the
Available
menu you check the number of available transmitters.
2.3.
In the
Free
menu you check how many transmitters you can still create.
7.2
Registering animals
Calves are only fed at the feeder if they are also registered there. You can either manually reg-
ister each calf or instruct the feeder to automatically register the calves. In the latter case, the
calf is registered as soon as it enters the feeding station for the first time. This means that the
manual registering of the calves is not needed.
During registration, the calf is allocated to one of four groups, A to D. The calf will then be fed
in accordance with the feed and concentration plans of this group.
The group to which you allocate the calves depends solely on the feed quantity and the con-
centration the end user wishes to dispense to the calves. In this case, it does not matter which
station the calves consume their feed in or which bay the calves have been housed in.
7.2.1
Manual registration of animals
You register animals manually as follows:
1. Navigate via
> Animal management > Registration
to the
Animals
sub-menu.
2. Select one of the available (not yet registered) animal numbers.
3. In
Group
, select the group to which the calf is to be allocated.
4. If you wish to reduce the total feeding duration for the calf, you can set this up under Cor-
rection days (see
Feeding> Total feeding duration
in the operator's manual).
5. Confirm
Register?
by choosing
.
6. Confirm the prompt
Register animal xx in group X?
by choosing
.
Note:
On its registration day, the animal receives the exact amount of feed, spread over the
course of the day, as intended for the first day according to the feeding plan. If you have entered
correction days, the animal will receive the feed that is intended for the corresponding day.
Note:
For the next manual registration, the values last set will again be shown and can be used
or changed for the current animal.
Содержание TAP5-VS2-50
Страница 121: ...Appendix 121 10 4 Standard feeding plans ...
Страница 122: ...122 Appendix ...
Страница 129: ...Index 129 Unknown transmitter 101 Water connection 12 Water pressure 24 Weight 12 ...