Forme FMC-5241 Скачать руководство пользователя

Страница: 5 / 40

TEMPERATURE

This option allows switching from cooking time setting to the temperature setting.

TIMER

Button for starting cooking delay.

DIY (Do It Yourself)

Function with manual time and temperature setting for any recipe.

GETTING STARTED

Wipe the body with a damp sponge. Rinse the bowl with warm soapy water without using of corrosive and
abrasive detergents. Dry thoroughly.
It is recommended to boil the water in the multicooker in a STEAM temperature for 30 minutes at half-filled
bowl. When finished unplug the appliance, allow it to cool down with a cover open, and then drain the water. Wipe
dry the appliance and leave it to air dry with the cover open.

OPERATING PROCEDURE

Open the cover by pressing the button. Hold the cover when opening. Remove the bowl from the multicooker.

PLACE THE REQUIRED PRODUCTS INTO THE BOWL

Follow the recipe for cooking and instructions in the cooking programs description.

PLACE THE BOWL INTO MULTICOOKER

Make sure that there are no foreign objects or liquids between the bowl and heating surface. Gently turn the
inner bowl in the Multicooker from side to side to establish the best possible contact with the heating surface.

PLUG IN THE MULTICOOKER

Caution! Electrical network parameters must correspond to the appliance specifications.

Select the cooking program by pressing the

button

LED indication of the selected program will flash on the display, as well as operation indicator and timer showing
the run time by default.

Change the cooking time.

Touch the

button to set the cooking time. LED indicator of the selected program, operation indicator,

and timer will flash during setting. You can use the default time or determine the necessary time empirically.

Multicooker cover may be open or closed depending on the cooking program and recipe instruc-

tions.

At the wrong cover position the result may not meet the requirements.

Set the cooking temperature according to cooking recipes. Temperature change is available for

DIY programs.

Touch button to switch from time setting to setting the temperature. The cooking temperature value will
light on and flash on the display by default, as well as the name of the selected program. Touch the

button

set the cooking temperature.

Start the cooking program

Touch the button.
After start the program name, cooking time and operation indicator will light on the display. indicator lights up,
which means that on completion of the program the appliance will automatically switch to KEEP WARM mode.

End of the program

Upon program operation completion the Multicooker beeps and operation indicator lights off. The appliance will
switch into KEEP WARM mode if it was not earlier turned off. In KEEP WARM mode the display will show a direct
time countdown showing how long the dish is being preheated.

Unplug the appliance

If the appliance is in KEEP WARM mode – turn off the mode by holding button for two seconds. Unplug the
appliance. Open the cover and carefully remove the bowl. Caution! The bowl may be hot.

TIMER function (Delayed Start)

This feature allows cooking by the required time. The delay start maximum time is 24 hours. This function is
available for all programs. Do not delay the start for a long time, if the ingredients include perishable products.
Prior activating the delayed start, first select the cooking program by touching button. Set the program
parameters (time and temperature). To activate touch

button – TIMER indicator lights up on the display.

Using

button set the time after which the dish should be ready. The display will show the total delay time

and cooking time.
Touch the button. Multicooker will start the time countdown. When the delay time comes to an end, TIMER
indicator will light off and operation indicator will light on; Multicooker will start the program with the given
parameters.

Mode on/off function

You can disable in advance the automatic switch over to KEEP WARM mode when the program ends. To do this,
after the program start touch the button again. The appliance beeps and

indicator will light off. To restart