Control terminal functions
Lock output, 24Vdc
K
Lamp output , 24Vdc
L
Black Lamp & lock common
C
Red Accessory power
A
Black Common
C
Yellow Safety, re-open
F
Orange Pause either direction
E
Black Common
C
Green Full opening input
G
Pedestrian opening
D
Accessories below have NO contacts. FORESEE’s wireless button
& keypad work on the remote channel so require no wiring.
Exit button
is normally in the property. A
keyswitch
can
on either side, or for use by authorised persons only (eg teachers)
Vehicle sensors
are normally used for leaving the property,
often described as ‘free exit’ sensor. A single point vehicle sensor
is placed in the driveway. Adding a time clock to work during the
day could be viable ‘free entry’ device for a commercial property.
Keypads
are useful for friends, family or trusted delivery
drivers. This keypad can accept many codes, and some for single
use (less trusted delivery drivers).
Intercoms
normally require a cable to the house. These two
types need only 2 wires (not shown here), which can be included
in a ’Low Power’ RIO-XL ’s power supply cable. Intercoms and
keypads are normally on the left pier to suit visitors by car.
Smartphone control
offers a modern control method with
a device we all carry. A data cable to the house is not necessary
for simple control, but adds features if it is included at this early
stage. They can replace the intercom and additional remotes.
Activation device wiring
10
VY805
button
FA61
Keyswitch
K15
Keypad
202
Audio intercom
502
Video intercom
VD909
vehicle
Sensor
Fig 19a-d
