Ford Thunderbird, Руководство пользователя

Страница: 52 / 335

03-01A-13
Engine, 3.8L 03-01A-13
IN-VEHICLE SERVICE (Continued)
12. Start engine and check for oil or coolant leaks.
Part
Item Number
1 N605890-S2
2 6K564
3 6500
4 60 10
A
-
Intake Manifold
Upper
Removal
Description
Bolt (4 Req'd)
Tappet Guide Plate and
Retainer (2 Req'd)
Valve Tappet ( 1 2 Req'd)
Cylinder Blocks
Tighten to 10- 1 4 N-m (7- 10
Lb-Ft)
1 . Remove air cleaner outlet tube {98659). Refer to
Section 03-12.
2. Disconnect accelerator cable {9A758) at throttle
body {9E926). Disconnect speed control
actuator cable {9A825) {if equipped).
3. Remove retaining bolts from accelerator cable
and position cables aside.
4. Disconnect vacuum lines at upper intake manifold
{9424).
5. Disconnect necessary electrical connectors.
6. Disconnect crankcase ventilation tube {6758) at
the upper intake manifold and at positive
crankcase ventilation valve {PCV valve){6A666).
7.
Remove throttle body if necessary. Refer to
Section 03-04A.
8. Remove the EGR valve {EGR valve){9D475) from
the upper intake manifold. Refer to Section
03-QS.
9. Remove the nut and bolt retaining engine support
and wiring retainer bracket located at the LH
front of the intake manifold and set aside with
ignition wires.
10. Remove upper intake manifold retaining
bolts
I
studs.
1 1 . Remove upper intake manifold and intake
manifold upper gasket {9H486).
TIGHTEN IN SEQUENCE IN THREE STEPS
REFER TO CALLOUT TABLE
AA1005-A
Part
Item Number
Description
1 N804268 Bolt (4 Req'd)
2 N805840 Stud Bolt
3 9424
Intake Manifold, Lower
4
-
Locating Pins (2 Req'd)
5 9H486
Intake Manifold Upper
Gasket
6
9424 Upper Intake Manifold
7 N804834
Bolt
A
-
Tighten in sequence in three
steps:
e
10 N·m (8 Lb-Ft)
e 20 N·m ( 15 Lb-Ft)
•
32 N·m (24 Lb-Ft)
1997 Thunderbird, Cougar July 1996