Foma P906i, Инструкция по эксплуатации

Страница: 421 / 627

419
Co
nv
e
n
ie
nt Fu
nc
ti
on
s
During a videophone call, you can record the receiving images along
with voice.
You can record up to five items for about 20 seconds per item.
≥
See page 73 for playing back/erasing “Movie memo”.
1
During a videophone call
1 >
(for at least one second)
A beep sounds and recording starts. “ ” is displayed during recording.
≥
A still image specified by “Movie memo” of “Select image” is shown on the other
party
’ s display.
≥
To suspend the recording midway, press
O o
( ) or press and hold
>
(for at
least one second).
≥
Press
h
to end the recording and the call.
≥
A beep sounds about 5 seconds before the recording time (for about 20 seconds)
ends. The beep sounds twice when the recording ends and the “Talking” display
returns.
Information
≥
The recording is suspended when a call comes in, when an alarm for “Alarm”,
“Schedule”, “ToDo”, “Book program”, or “Timer recording” sounds, or when you switch
the displays by Multitask.
<Movie Memo>
Recording Images during a Videophone
Call as a Movie Memo
Information
≥
If you record a movie memo when five movie memos have already been recorded,
the oldest movie memo is overwritten regardless of whether you have played it back
or not.
≥
You cannot record a movie memo while operating each item in the Function menu.
You can confirm the last and accumulated call duration and cost for
voice calls and videophone calls.
≥
Displayed call duration and cost are for reference and might differ from the actual ones.
In addition, the consumption tax is not included in the call cost.
≥
Both the voice call duration and digital communications duration (videophone call
du 64K data communication duration) are displayed and both incoming and
outgoing calls are included in the duration.
≥
The call cost is for the outgoing calls only. However, “¥0” or “¥
¢¢
” is displayed for toll
free calls such as Free Dial or for Directory Assistance Service (104), etc.
≥
The call cost is accumulated on the UIM. Therefore, when you replace the UIM, the
charge accumulated on the UIM in use is displayed. (accumulation from December 2004)
※
You cannot display the accumulated cost on the UIM using the FOMA phones that
were released before the 901i series. (The cost is accumulated on the UIM.)
≥
You can reset the displayed call duration and call cost.
1
m 1
Settings
1
Call time/cost
1
Call data
Last call duration
Talk: Displays the call duration of the latest voice call.
Digital Videophone: Displays the call duration of the latest videophone call.
Non-limiting digital: Displays the call duration of the latest 64K data
communication.
Last call cost
Talk: Displays the call cost for the latest voice call.
Digital Videophone: Displays the call cost for the latest videophone call.
Non-limiting digital: Displays the call cost for the latest 64K data communication.
Total calls duration
Talk: Displays the call duration of voice calls from the time Reset Total Duration
was executed to the current time.
Digital: Displays the call duration of videophone calls and 64K data
communication from the time Reset Total Duration was executed to the
current time.
Total calls
Displays the call cost from the time Reset Total Cost was executed to the current
call.
+ m - 6 - 1
<Call Data>
Checking Call Duration and Cost