Foma P906i, Инструкция по эксплуатации

Страница: 240 / 627

23 8
Mai
l
When you receive an Area Mail message, the ring tone for Area Mail
sounds. The “Ring volume”, “Ring time”, and “Vibrator” settings follow
those of “Mail”.
When you receive an emergency earthquake alert, a dedicated buzzer
(alarm) sounds, and the vibrator works to notify you. Further, the
contents are automatically displayed. “Ring volume” is fixed to “Level 4”,
and “Vibrator” is fixed to “Melody linkage”, so you cannot change their
settings. You can use “Area mail settings” to set “Beep time”.
Up to
3 0 Area Mail messages are saved separately from i-mode mail
messages and SMS messages in the Inbox.
1
When an Area Mail message arrives,
“ ” blinks and the message telling its
arrival appears.
≥
If you press any key, the former display returns.
≥
The details of some Area Mail messages might be
displayed when you receive them. To clear it, press
O o
,
r
, or
h
.
≥
See page 217 for displaying Area Mail messages.
Receiving Early Warning “Area Mail”
Reception Result
display
Information
≥
The buzzer does not sound when you receive an emergency earthquake alert with the
manner setting set by “Manner mode” or “Super silent”. However, the buzzer sounds
with “Original” set to sound any of the following tones. When every setting is set to
mute, the buzzer does not sound:
・ Phone volume ・ Mail volume ・ Alarm volume
・
VM tone
・
Keypad sound
≥
Even when “Vibrator” of “Original” is set to “OFF”, the vibrator works if you receive an
emergency earthquake alert.
≥
When you receive a new Area Mail message with 30 Area Mail messages saved, the
read messages are overwritten from the oldest. When all 30 messages are not read,
they are overwritten from the oldest one in order.
≥
Whether the details of a received Area Mail message are displayed or not depends on
the setting by the Area Mail message provider.
1
l 1
Area mail settings
1
Do the following operations.
<Area Mail Settings>
Setting Early Warning “Area Mail”
Item Operation/Explanation
Receive setting You can set whether to use Area Mail.
1
Read exemption clause thoroughly
1
Yes or No
Receive entry You can register Message IDs for the reports to be received other
than emergency information. You can register up to 20 IDs.
≥
You do not need to operate “Receive entry” for receiving only
emergency earthquake alert and disaster/evacuation
information.
1
<New>
1
Enter your Terminal Security Code
1
Enter a registration name
1
Enter a Message ID.
≥
To edit a registered Message ID, highlight it, press
l
( ),
and then enter your Terminal Security Code.
≥
You can enter up to 15 full-pitch/30 half-pitch characters for an
arbitrary registration name. For a Message ID, enter 4 half-pitch
characters specified by the service provider.
≥
You can edit also by selecting “Edit” from the Function menu.
Select “Delete this” to delete the Message ID, and select
“Delete all” and enter your Terminal Security Code to delete all
Message IDs.
≥
You cannot edit/delete “Emergency information”.
Beep setting You can set whether to make the beep sound for when you
receive an Area Mail message that beeps.
1
ON or OFF
≥
When you set “OFF”, the dedicated ring tone for Area Mail
sounds.
Beep time You can set the duration the beep sounds.
1
Enter a beep time (seconds).
≥
Enter it in two digit, from “01” through “30”.