Foma P906i, Инструкция по эксплуатации

Страница: 611 / 627

46
Perform the operation on page 4 to connect the FOMA
phone to your personal computer.
1
“ [
スタート
(Start)]”
1
Open “
接続先
(Access point)”.
2
Select access point and click “
接続
(Connect)”.
3
Confirm the contents and click “ ダイヤル (Dial)”.
≥
When connecting to “mopera U” or “mopera”, you can leave the
user name and password fields blank.
4
The display appears to indicate the connecting state.
In this period, the system performs logon processing to confirm the
user name and password.
5
After the connection is completed, click “ 閉じる (Close)”.
≥
You can start the browser software to browse web pages, use
e-mail and so on.
Making Dial-up Connection
1
Click the dial-up icon on
the task tray.
2
Select “
接続または切断
(Connect or
disconnect)”, then click “ 切断 (Disconnect)”
1
Click “ 閉じる (Close)”.
If you cannot connect to network (if you fail a dial-up
connection), confirm the following items:
Information
≥
Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥
The power consumption of the FOMA phone increases during
communication.
≥
During packet communication, the communication state appears on the
FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
≥
During 64K data communication, “ ” appears on the FOMA phone.
Disconnecting
Information
≥
The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥
The baud rate displayed on your personal computer may be different
from the actual one.
When you cannot connect to network
If this error occurs Confirm those:
Your personal
computer cannot
recognize “FOMA
P906i” ･ Confirm whether your personal computer satisfies
the operating environment (see page 2).
･ Confirm whether “FOMA communication setup
files” (driver) is installed in your personal computer.
･
Confirm whether the FOMA phone is connected to
your personal computer and powered on.
･ Confirm whether the FOMA USB Cable with
Charge Function 01/02 (option) is securely
connected.
･ Confirm whether the Bluetooth device is connected
using the Dial-up service.
You cannot connect
to the access point
･
Confirm whether the ID (user name) and password
are correct.
･ When you need to notify your caller ID such as
when using “mopera U” or “mopera”, make sure
“184” is not prefixed to the phone number.
･ Confirm that “ フロー制御を使う (Use the flow
control)” is checked in the modem properties.
･
If you cannot connect to the access point even
after confirming above, contact your Internet
service provider or network administrator for the
setting method, and so on.