Foma P906i, Инструкция по эксплуатации

Страница: 65 / 627

63
Vo
ic
e/V
ideo
p
h
one
Cal
ls
The volume of the other party’s voice is turned up according to the
surrounding noise during a call. This setting is effective only when the
other party's voice is output from the earpiece.
1
m 1
Settings
1
Talk
1
Shikkari Talk
1
ON or OFF
The noise sending to the other party is reduced according to the
surrounding noise during a call.
1
m 1
Settings
1
Talk
1
Noise reduction
1
ON or OFF
When you switch to Hands-free, sound such as the other party’s voice is
audible over the speaker.
1
During a call, dialing, or connecting
1 d
When Hands-free is activated, “ ” is displayed.
≥
Press
d
again to deactivate Hands-free.
≥
The sound volume during a Hands-free call follows the setting specified by
“Volume” (earpiece volume).
≥
You can switch to Hands-free even during Manner Mode. Also, you will still hear
voice through the speaker even when you activate Manner Mode during a
Hands-free call.
Information
≥
The reconnectable time differs depending on the usage status and radio wave conditions.
An estimate is about 10 seconds and the call charge is applied also for that duration.
≥
While you are disconnected, no sound is transmitted to the other party.
<Shikkari Talk>
Making Voice Clear According to
Surrounding Noise
+ m - 7 - 6
<Noise Reduction>
Reducing Surrounding Noise to Make
Voice Clear
<Hands-free>
Switching to Hands-free
You can make or receive voice calls from a Hands-free compatible device
such as In-Car Hands-Free Kit 01 (option) or a car navigation system by
connecting with your FOMA phone.
You can connect your FOMA phone to a Hands-free compatible device
using two ways of connections as follows:
≥
Connect using a cable (USB connection):
To use/charge via the In-Car Hands-Free Kit 01 (option), you need to have the FOMA
In-Car Hands-Free Cable 01 (option).
≥
Connect using Bluetooth (wireless):
To connect to a Bluetooth communication compatible Hands-free device, you need to
register and connect it to the FOMA phone.
※
For how to operate Hands-free compatible devices, refer to the respective instruction
manuals.
Information
≥
While the Flat-plug Earphone/Microphone with Switch (option) is connected, you
cannot hear voice through the speaker even if you switch to Hands-free.
≥
Keep the FOMA phone well away from your ear during a Hands-free call. Otherwise
you could affect or damage your hearing.
≥
Talk into the FOMA phone within a distance of about 50 cm.
<In-Car Hands-free>
Using Hands-free Compatible Devices
Information
≥
To connect using a cable (USB connection), set “USB mode setting” to
“Communication mode”.
≥
“ ” appears while you are talking or communicating using a USB Hands-free
compatible device.
≥
“ ” might appear while the FOMA phone is connected to a USB Hands-free
compatible device, and “ ” while “USB mode setting” is set to “microSD mode”,
depending on the Hands-free device connected.
≥
The display or ring tone for incoming calls follows the settings of the FOMA phone.
≥
When the sound is set to output from a Hands-free compatible device, the ring tone
sounds from that device even when Manner Mode is activated or “Ring volume” of the
FOMA phone is set to “Silent”.
≥
The receiving operation in Public Mode (Drive Mode) works in accordance with the
“Public (Drive) mode” setting.