FMS CMGZ411, Руководство по эксплуатации

Страница: 35 / 40

Operating Manual CMGZ411/421
35
Center diameter CMGZ411
Purpose: Stores the minimum bobbin diameter. Used to calculate the actual bobbin diameter.
Range: 10 to 5000 Default: 100
Increment: 1 Unit: [mm]
Max. diameter CMGZ411
Purpose: Stores the maximum bobbin diameter. Used to calculate the actual bobbin diameter.
Range: 10 to 10000 Default: 1000
Increment: 10 Unit: [-]
Tension reduction CMGZ411
Purpose: The CMGZ411 provides facilities to reduce tension across the changing bobbin diameter. Under
this parameter, the reduction is selected as linear, square or square root function.
Range: none, linear, quadratic, root Default: root
Reduction value CMGZ411
Purpose: Stores the correction factor used at maximum bobbin diameter. For tension reduction, refer to
chapter „Parametrization of the PID controller“
Range: 0.000 to 1.000 Default: 0.000
Increment: 0.001 Unit:
[
N/kN
]
Scal. potmeter reference CMGZ411
Purpose: Stores the tension value that will correspond to a signal of 10V at the analogue input (terminals
d6 / d8).
Range: 0 to 9999 Default: 0
Increment: 1 Unit:
[
N/kN
]
Correction input CMGZ411
Purpose: This parameter is uesd, if the wrap angle is changing continuously. It is possible to choose
between a linear or a cosine correction. Refer to chapter „correction input“
Range: none, linear, cosine Default: none
Linear correction at 0V CMGZ411
Purpose: This parameter stores the factor that is used when 0V is applied to the correction input (terminals
d6 / d8). The feedback value can be changed up (>1.000) and down (<1.000). Only active if
parameter „correction input“ is „linear“.
Range: -9.999 to 9.999 Default: 1.000
Increment: 0.001 Unit: [-]