Operating Manual CMGZ411/421
34
Start limit
Purpose:
If there is slack material in the machine when the controller is enabled, the drive would take up the
slack very fast. If tension is reached, the drive cannot decelerate fast enough, so that material
cracking can be the result. To avoid this, the controller drives with a low speed until the force
stored here is reached.
Controlling a brake, this parameter is not used.
Range:
0.0
to
100.0
Default:
90.0
Increment:
0.1
Unit:
[% reference]
Synchronisation-stop
Purpose:
If the synchronisation stop is not active, the output value will be 0V immediately if the controller
is disabled. If the synchronisation-stop is active, the controller will control until output has
reached 0V.
Range:
No,
Yes
Default:
No
Line speed overlay CMGZ411
Purpose:
This parameter gives the percentage quota of the controller output which will be overlayed to the
line speed. Common value is 10%.
Range:
0.0
to
100.0
Default:
00.0
Increment:
0.1
Unit:
[%]
Line speed tacho CMGZ411
Purpose:
Stores the revolutions per minute that will rise a 1V signal at the line speed tacho.
Range:
1
to
1000
Default:
300
Increment:
1
Unit:
[rpm/V]
Winder drive CMGZ411
Purpose:
Stores the revolutions per minute that the drive will have when a 1V signal is applied to his input
terminal.
Range:
1
to
1000
Default:
300
Increment:
1
Unit:
[rpm/V]
Tacho diameter CMGZ411
Purpose:
This parameter stores the diameter of the roller with the line speed tacho.
Range:
10
to
1000
Default:
100
Increment:
1
Unit:
[mm]
Содержание CMGZ411
