Operating Manual BKS601C
19
7.4
Mounting the Steering Device
Assembly and wiring of the steering device is performed according to the
manufacturer’s specification. Bear in mind that the steering device is mounted such
that it takes into account the running direction of the web. If a steering frame is used,
the pivot point must be located at the edge of the inbound roller. Sensors must be
located at the exit side after the outbound rollers (
Fig. 13
).
Wiring is described in the wiring diagram (
Fig. 8
). The configuration of the screw
terminals in the electronic unit are seen in (
Fig. 5
)
Fig. 13: Definition of running direction in the steering device
K600005e
7.5
Mounting of Manual Sensor Adjustment
With regard to the running direction of the web, the manual sensor adjustment is
installed
after
the steering device (
Fig. 13
). It has to be mounted on the static part of
the machine frame. The sensors are movable on the square bar and can be locked with
the retaining screw.
Note
In order to achieve an optimal controlling performance, the sensors must be placed
near to the outbound roller of the steering frame. If the sensors are placed far from the
steering frame, control dynamics will deteriorate drastically.
