SkyRanger Nynja 600 Operators Manual issue 1
26
7.3 Tail
The tail plane is not designed to be a regular de-rig item, however it
may be removed for long distance trailering, as may the rudder. When
re assembling these parts replace all Nyloc nuts that were removed for
disassembly.
7.4 Inspection
Following rigging a thorough inspection must be made that the aircraft
has been rigged correctly, controls correctly connected and
functioning, and all fasteners are correctly inserted and tightened. A
duplicate inspection should be carried out by a qualified person, and
recorded in the airframe log book with signatures from both parties.
See 9.3.2 for more information.
7.5 Use of wing fold mechanism
Use of the optional wing fold mechanism is detailed in the wing fold
instructions which should be put in Annex D. In this case a good post
unfolding inspection should be carried out by the pilot, but a second
duplicate inspection and log book entry is not required.
7.6 Ground transport
If transported dismantled great care must be taken to protect the
structure against Damage caused by relative movement, chafing and
stresses. A dedicated trailer is recommended with suitable supports,
brackets and securing systems.
Содержание SkyRanger Nynja 600
