![background image](http://html1.mh-extra.com/html/flylight-airsports/skyranger-nynja-600/skyranger-nynja-600_operators-maintenance-manual_2311647041.webp)
SkyRanger Nynja 600 Operators Manual issue 1
41
9.12 Cleaning lubricating and protecting the structure
9.12.1 Aluminium and steel airframe components and fasteners can corrode
rapidly in certain adverse conditions. These include:
Operation in a ‘marine’ environment (near the coast where salt can be
in the air).
Dust or dirt left on the structure for prolonged periods.
Dampness for prolonged periods – especially dampness coupled with
dirt or dust.
9.12.2 Always keep the aircraft clean. It pays to clean the aircraft after use
before storage. But avoid putting the aircraft away wet in a closed
hangar with reduced ventilation.
9.12.3 Proprietary car ‘wash wax’ cleaning products are generally suitable for
washing. Pay particular attention to rinsing to ensure all traces of
detergent are removed.
9.12.4 Particular care should be exercised cleaning Dacron fabric. We
recommend ‘Starbrite Sail and Canvas Cleaner’.
9.12.5 For corrosion protection we recommend ‘ACF50’ anti corrosion fluid
be liberally applied periodically to the airframe components. This can
be applied to a cloth and rubbed on – much like a polishing
operation. Use the aerosol directly to get in tight areas and exposed
tube ends. Wiping away any dribbles and excess.
9.12.6 Exposed steel parts like wing strut ends, tailplane turnbuckles etc are
recommended to be coated with a thin layer of multi-purpose or
silicon grease.
9.12.7 Control surface hinges should be regularly lubricated – either with
grease (multi-purpose or silicon grease) or a drop of light oil.
9.12.8 Glass-fibre parts can be polished after washing with wax polishes.
9.12.9 Lexan glazing is sensitive to cleaning product in order to remain clear
and streak free. It can embrittle and crack if exposed to most cleaning
chemicals. In general, clean with water only. Very small
concentrations of wash wax type cleaners in the water may be used
with low risk. Insects will need a good soaking to remove – avoid
rubbing them aggressively as the Lexan can easily scratch. A soft
sponge or microfiber cloth works best. Dry with a microfiber cloth
Содержание SkyRanger Nynja 600
