Testing ATM Networks
Bit Error Rate Test (BERT)
6
6-79
3.
Press the
Left
or
Right Arrow
key until the
!USR
setting is displayed:
BERT SELECTIONS
Start BERT
Select BERT Pat !USR
Setup Error Inj E-3
za159f.eps
4.
Press
ENTER
. The following menu is displayed:
BERT USER DEFINED
PATTERN
User Edit: 00000000
Any 8 bit value
za160f.eps
You are now in Edit mode. The number in the first position of the
User Edit
field is flashing to indicate that you are now operating in this mode.
5. Press the
Up
or
Down Arrow
key to select a value for the first position in the
User Edit
field. Then, press the
Right Arrow
key to move to the second position.
Continue pressing the arrow keys in this manner until all of your selections are
made. Then, press
ENTER
.
The tester stores the pattern you created. This is the pattern that the OC3port
Plus uses when you run a BERT test.
Running an ATM BERT Test
To run an ATM BERT test, do the following:
1.
Press the
BERT
key. The
BERT SELECTIONS
menu is displayed:
2.
Make sure that the
Start BERT
option is on the selection line.
3.
Press
ENTER
. The BERT test begins.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
