manualshive.com logo in svg

Fluke MDA-510, Руководство пользователя

Поделиться
Скачать
Fluke MDA-510 Скачать руководство пользователя страница 33

Motor Drive Analyzer

Specifications

29

Specifications

DC Voltage (V DC)

Maximum voltage with 10:1 or 100:1 probe..............1000 V
Maximum resolution with 10:1 or 100:1 probe..........1 mV
Full scale reading......................................................999 counts
Accuracy at 4 s to 10 us/div......................................±(3 % + 6 counts)

AC voltage (V AC)

Maximum voltage with 10:1 or 100:1 probe..............1000 V
Maximum resolution with 10:1 or 100:1 probe..........1 mV
Full scale reading......................................................999 counts
50 Hz ........................................................................±(3 % + 10 counts) -0.6 %
60 Hz ........................................................................±(3 % + 10 counts) -0.4 %
60 Hz to 20 kHz ........................................................±(4 % + 15 counts)
20 kHz to 1 MHz .......................................................±(6 % + 20 counts)
1 MHz to 25 MHz ......................................................±(10 % + 20 counts)

True-rms voltage (V AC+DC)

Maximum voltage with 10:1 or 100:1 probe..............1000 V
Maximum resolution with 10:1 or 100:1 probe..........1 mV
Full scale reading......................................................1100 counts
DC to 60 Hz ..............................................................±(3 % + 10 counts)
60 Hz to 20 kHz ........................................................±(4 % + 15 counts)
20 kHz to 1 MHz .......................................................±(6 % + 20 counts) 
1 MHz to 25 MHz ......................................................±(10 % + 20 counts)

PWM Voltage (V Pwm)

Purpose ....................................................................To measure on pulse width modulated signals, like Motor Drive inverter outputs
Principle ....................................................................Readings show the effective voltage based on the average value of samples over a whole number of 

periods of the fundamental frequency

Accuracy ...................................................................As V AC+DC for sinewave signals

Peak Voltage (V Peak)

Modes .......................................................................Max peak, Min peak, or pk-to-pk
Maximum voltage with 10:1 or 100:1 probe..............1000 V

Содержание MDA-510





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды